Full-automatic hydrogen and nitrogen distribution equipment

Equipment advantages:

1. High precision mass flow controller is selected to visually display the flow of each proportion in the proportioning process

·The mass flow controller has the following advantages:

·Instantaneous start without preheating, control corresponding time ≤ 2ms (typical)

·Fluid control accuracy ± (0.5% Rdg+0.2% F.S)

·The ratio test is carried out with the minimum ratio test run, and the gas loss is smaller.

·During the mixing process, the mass flowmeter can be fine-tuned in the control room to achieve higher accuracy.

2. The upper computer communication control is used to display the specific parameters in the process of proportioning.

·The mass flowmeter is used as the on-site control device, and the real-time flow of the proportioning can be directly viewed on the site.

·The remote control room is operated by communicating with the mass flow meter, with no loss of accuracy.

·The control operation is started with one key, and the required proportion is pre-saved.

3. Field measurement and remote signal transmission are adopted for sampling and analysis.

·The analytical instrument adopts two-stage composition to display the ratio faster and more accurately.

·The analytical instrument adopts the advanced single light source, single tube semi-air chamber, micro-tone film detector with high stability and reliability, and new thermoelectric detector. The biggest feature of this product is high stability (stable operation of the instrument for a long time, small zero drift), high reliability (solid detector) and high selectivity.